Buying guide · Heat pumps · 2026
Heat pump buying guide for the United States
The right heat pump depends on your winter, on what you heat with now and on the rebates where you live, so a single national answer is usually wrong. This guide takes the decision in order and puts your local numbers beside each step.
The short version
- If you heat with electric baseboards or an electric furnace, a heat pump cuts the cost of heat by 55% to 64%.
- Against an oil furnace, it costs 31% to 68% less everywhere we hold a home oil price.
- Against gas it depends on local prices: it costs less to run than a 95% gas furnace in 12 of the 26 places we cover with piped gas (Texas, Georgia, Florida, Arizona, Washington, North Carolina and Oregon) and more in the rest. See your place.
- Buy for the climate you have: 76% of certified models carry the cold-climate rating, and the best keep all of their rated heat at 5°F. We pick three systems for each climate.
- The size comes from a heat-loss calculation (Manual J), and the price from the house and the installer more than the badge. Get both in writing.
- Rebates almost always need a licensed contractor and a model on the program's list. Check the list before you sign.
Does a heat pump pay in your house? Start with what you heat with now
| You heat with | On running cost | What usually decides it |
|---|---|---|
| Electric baseboards or an electric furnace | The heat pump wins everywhere we cover, cutting the cost of heat by 55% to 64%. | Whether one ductless head can reach the rooms you use, and the rebate. |
| Oil or propane | Against an oil furnace, it costs 31% to 68% less everywhere we hold a home oil price. | The rebate, and whether you keep the old system as backup for the coldest days. |
| Natural gas | It depends on your prices: it costs less to run than a 95% gas furnace in 12 of the 26 places we cover with piped gas (Texas, Georgia, Florida, Arizona, Washington, North Carolina and Oregon) and more in the rest. Place by place. | Whether the air conditioner or furnace is due anyway, the rebate, and whether a hybrid setup suits you. |
| Anything, and the air conditioner is failing | A heat pump cools like an air conditioner and heats in mild weather for less. | The price difference between a new air conditioner and a heat pump, which is the real cost of the upgrade. |
Before you size anything, measure the house
A heat pump is sized to the heat the house loses on a cold day. Sealing air leaks and topping up the attic first can mean a smaller, cheaper system and lower bills whatever heats the house.
- A blower door test measures how leaky the house is.
- A heat-loss calculation (Manual J) turns the house into the number the heat pump is sized to.
- The planner puts the upgrades for your home in order and shows which rebates need an audit first.
Which type fits your house
- A house with ducts: a central (ducted) heat pump. It replaces the air conditioner and takes over most or all of the furnace's work, through the ducts you have. Typical sizes are 2 to 4 tons. Have the installer confirm the ducts can carry the airflow.
- A house without ducts: a ductless mini-split. A wall-mounted head heats and cools an open floor or main level; more heads, or a second system, cover more rooms. This is the usual choice for homes with baseboards or a boiler.
- One room. A small ductless head for an addition, a room over the garage or a home office.
- Hybrid (dual fuel). A heat pump shares the ducts with a gas furnace and hands over to it below a set temperature. Worth it where gas is cheaper to run than electricity in deep cold.
- Geothermal. The highest efficiency and the highest price, with drilling or trenching. Our geothermal page covers when it makes sense.
The systems we'd buy, by climate
For each of 9 US climate zones we pick three systems: best performance, best to install yourself and best value. The table shows the best-performance pick; each zone's page has all three, with the reasons. How we pick.
| Climate zone | No ducts | With ducts | One room |
|---|---|---|---|
| Very coldMinneapolis–St. Paul | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Trane 20 TruComfort Cold Climate Heat Pump with WeatherGuard | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted |
| Cold and humidChicago, Boston, Detroit | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Lennox Dave Lennox Signature Collection SL22KLV Cold Climate Heat Pump | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted |
| Cold and dryDenver | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Lennox Dave Lennox Signature Collection SL22KLV Cold Climate Heat Pump | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted |
| Mixed-humidNew York City, Washington, DC, Philadelphia | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Lennox Dave Lennox Signature Collection SL22KLV Cold Climate Heat Pump | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted |
| Warm mixed-humidAtlanta, Charlotte | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Lennox Dave Lennox Signature Collection SL22KLV Cold Climate Heat Pump | Mitsubishi Electric M-Series |
| Hot and humidDallas–Fort Worth, Greater Houston, Miami | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Carrier Infinity 23 Heat Pump | Mitsubishi Electric M-Series |
| Hot and dryPhoenix, Riverside | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Carrier Infinity 23 Heat Pump | Mitsubishi Electric M-Series |
| Mild coastalLos Angeles, San Francisco, San Diego | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Trane 20 TruComfort Cold Climate Heat Pump with WeatherGuard | Carrier Infinity 35 Mini Split Heat Pump with Basepan Heater |
| MarineSeattle, Portland | Fujitsu AIRSTAGE Orion XLTH+ wall-mounted | Trane 20 TruComfort Cold Climate Heat Pump with WeatherGuard | Carrier Infinity 35 Mini Split Heat Pump with Basepan Heater |
The numbers on a spec sheet, and which ones matter
- COP at 5°F. Units of heat delivered for each unit of electricity, on a cold day. A COP of 2 means half the electricity of a baseboard for the same heat. This is the number that sets the winter bill.
- Heat kept at 5°F. The share of its rated heating capacity a system still delivers in the cold. The best keep 100% or more. The cold-climate rating allows as little as 70%, and then backup heat does more of the work.
- HSPF2 and SEER2. Seasonal heating and cooling efficiency. Higher is better; they matter most in mild winters and hot summers.
- EER2. Cooling efficiency on the hottest afternoons. It matters more than SEER2 in the desert Southwest.
- Cold-climate rating. ENERGY STAR's needs a COP of at least 1.75 at 5°F and 70% of rated capacity there. 76% of the 9,721 certified outdoor models sold in the US carry it.
- Refrigerant. New systems use R-454B or R-32: 67% of certified models do. Ask which one a quote uses; the older R-410A will get dearer to service.
- Variable speed. The compressor runs at the speed the house needs, which is quieter, more even and more efficient than switching on and off.
Every system we pick has to pass these gates before it is scored:
- Sold in the country, with warranty terms we have read for that country. Brands whose terms we haven't confirmed yet aren't eligible.
- A current refrigerant (R-454B or R-32).
- A variable-speed compressor.
- In cold zones, ENERGY STAR's cold-climate designation; in Canada, also NRCan's rebate thresholds (COP of at least 1.8 at −15°C and at least 70% of rated output there).
- In very cold zones, at least 80% of rated heat output kept at −15°C (5°F); in the North, 85%.
- Like for like: 2 to 4 tons for houses with ducts, 1 to 2 tons for a ductless head, 0.5 to 1 ton for one room.
Sizing and backup heat
A heat pump is sized to the design temperature: the cold the house must handle on all but the coldest 1% of winter hours.
- Ask for a room-by-room heat-loss calculation (Manual J) with the quote. The old furnace's size is not a guide: it is often larger than the house needs.
- Every certified rating stops at 5°F. Where the design temperature is lower, ask for the maker's output at your design temperature.
- Backup heat (electric strips, baseboards or the old furnace) should switch on only below the temperature the heat pump can no longer carry the house. Ask how it will be set.
What it costs to buy
| System | Installed | Source |
|---|---|---|
| Central, through your ducts | about $14,529 on average ($3,790 a ton) before incentives | EnergySage, March 2026 |
| Ductless, one indoor head | a few thousand dollars per indoor head, up to about $8,000 | EnergySage, October 2025 |
We show ranges for the type of system, not a price per model: the house and the contractor move the price far more than the badge. Extra heads, new electrical work and duct changes add to it.
What it costs to run
Cost of one million Btu of heat delivered, at local energy prices, in the largest places we cover. All 26 places, with the gas price where the two tie.
| Metro area | Heat pump | Gas furnace (95%) | Electric baseboards | Oil furnace (85%) |
|---|---|---|---|---|
| New York City | $31.30 (COP 2.8) | $17.89 | $87.63 | $52.92 |
| Los Angeles | $35.18 (COP 2.8) | $22.32 | $98.50 | — |
| Chicago | $22.53 (COP 2.5) | $11.47 | $56.33 | — |
| Dallas–Fort Worth | $16.62 (COP 2.8) | $19.68 | $46.54 | — |
| Atlanta | $17.03 (COP 2.8) | $20.74 | $47.68 | — |
| Washington, DC | $26.39 (COP 2.8) | $16.95 | $73.88 | — |
Rebates, and the rules that trip people up
Federal: the 25C tax credit ended for heat pumps placed in service after December 31, 2025. The Home Electrification and Appliance Rebates (up to $8,000 for a heat pump, by income) exist only where a state runs them.
- Most utility and state programs require an ENERGY STAR certified model, and many add a cold-climate or efficiency rule. Check the exact pairing before you sign.
- Almost every program requires a licensed or participating contractor. A system you install yourself usually gets nothing.
- Some need approval or an energy audit before any work starts. Work begun early is not paid.
- Amounts often depend on household income.
Each metro page below lists every program, its amount, its equipment rule and the date we checked it.
Before you sign: the quote checklist
- The exact outdoor and indoor model numbers and the AHRI reference number for the pairing. Look it up in the AHRI Directory and on ENERGY STAR's list.
- The room-by-room heat-loss calculation (Manual J) the size is based on.
- How backup heat is set, and at what outdoor temperature it switches on.
- Who applies for the rebate, and proof the model is on the program's list.
- Who registers the warranty, and by when. Most makers give their full term only if it is registered within 60 or 90 days.
- The electrical work, permits and any duct changes, priced in.
- A second quote for the same pairing, or for the runner-up on our zone page.
Brand matters less than the model, the sizing and the installer: several brands sell the same certified equipment under different names. Compare the 43 main brands on warranty, price tier and where they sell.
The guide for your metro
Each page has the local design temperature, running costs against every fuel, every rebate with its rules, and our three picks for that climate.
Find heat pump installers near you
Tell us about your home and what you want to heat or cool. A person reads every request and replies by email with the contractors and rebate programs that serve your ZIP code; we don’t send your details to installers.
More buying guides
Questions people ask
How much does a heat pump cost in the US in 2026?
Installed, a central system that uses your ducts costs about $14,529 on average ($3,790 a ton) before incentives (EnergySage, March 2026). Installed, a ductless system with one indoor head costs a few thousand dollars per indoor head, up to about $8,000 (EnergySage, October 2025). The house and the contractor move the price more than the brand does, so compare at least two quotes for the same model.
Do heat pumps work in cold climates?
A cold-climate model does. 76% of the 9,721 certified outdoor models on ENERGY STAR's list for the US carry its cold-climate rating, which needs a COP of at least 1.75 at 5°F and at least 70% of rated heating capacity still available there. Our pick for Cold and humid, the Fujitsu AIRSTAGE Orion XLTH+ wall-mounted, keeps 106% of its rated heat at 5°F. Below the temperature a system can carry the house, backup heat takes over, which is normal and part of the sizing.
What size heat pump do I need?
The size comes from a room-by-room heat-loss calculation (Manual J), not from the size of the old furnace or a rule per square foot. Ask for it in writing with the quote. An oversized heat pump costs more, cycles on and off and removes less humidity in summer; an undersized one leans on backup heat.
Can I install a heat pump myself?
Mostly, with one kind of kit. One line is sold for owner installation: the MrCool DIY 5th Generation, with pre-charged lines and a warranty that covers an owner install. Check your local permit and electrical rules before you buy; the new circuit is an electrician’s job. Rebates almost always require a licensed contractor, so price the rebate you would give up before you choose this route.
Is a heat pump cheaper to run than a gas furnace?
It depends on local prices: it costs less to run than a 95% gas furnace in 12 of the 26 places we cover with piped gas (Texas, Georgia, Florida, Arizona, Washington, North Carolina and Oregon) and more in the rest. Against electric baseboards it cuts the cost of heat by 55% to 64%. Our place-by-place table gives the gas price at which the two tie.
What should a heat pump quote include?
The exact outdoor and indoor model numbers, the AHRI reference number for the pairing, the heat-loss calculation, how backup heat is set, who applies for the rebate, who registers the warranty and by when, and the electrical work. With those you can compare two quotes like for like.
Sources and how this page is kept
Certified ratings are ENERGY STAR's for each exact outdoor and indoor pairing (283,445 pairings in the US, list pulled October 19, 2026). We don't test heat pumps in a lab, and we don't rate reliability beyond the warranty terms. The picks are recomputed whenever the list or a maker's terms change, and the site won't build once they are more than 180 days old.
What was checked when: Picks · ENERGY STAR list pulled · Rebates, warranties and where brands sell · Energy prices .
Who wrote it. Edited by David Bussell. Every number on this page comes from the sources above or is worked out from them, with the date each was last checked. Found a mistake? Tell the editor and we'll fix it.
How it's paid for. On this site there are no referral fees, and we don’t pass your details to contractors. No maker pays to be in a guide, and no fee changes a pick. More about how the site runs.