Buying guide · Duct cleaning · 2026

Duct cleaning: when it is worth it, and when to skip it

Duct cleaning is sold as a fix for dust, allergies and high bills. The two agencies that studied it found it does little for any of them in most homes. This guide covers the cases where it is worth paying for, and where the same money does more.

The short version

  • The US EPA: "Duct cleaning has never been shown to actually prevent health problems." It recommends cleaning only as needed.
  • CMHC's research found little or no change in airborne particles or airflow after cleaning.
  • It is worth doing for visible mold in the ducts, vermin, or ducts clogged with debris.
  • A proper job costs about $450 to $1,000 a system, by the EPA's figures. Check that a cheaper offer covers the whole system.
  • Leaky ducts are the bigger problem: 20% to 30% of the air is lost in a typical system. Seal them and fit a better filter first.

Do your ducts need cleaning?

When duct cleaning is and is not worth it
What you seeClean the ducts?What else to do
Visible mold inside metal ducts or on parts of the systemYes.Find and fix the moisture first, or it comes back. Insulated duct that is wet or moldy has to be replaced, not cleaned. Mold and air quality testing.
Droppings, nests or insects in the ductsYes.Close the way in.
Ducts clogged with dust or debris, or dust blowing from the registersYes. It can happen after a renovation or in a new house.Fit a better filter and seal the return ducts.
A dusty house, allergies, or nothing in particularNo.A better filter, changed on time. The air filter guide.
High bills or rooms that never get comfortableNo.Test the ducts for leaks and seal them. What leaky ducts cost.

Sources: the US EPA's guidance on duct cleaning and CMHC's "Should you get your heating ducts cleaned?". Some dust on a return grille is normal and is not a sign the ducts need cleaning.

What a proper job includes

  • The whole system. Supply and return ducts, registers, the blower, the coils and the drain pan. Cleaning only the ducts leaves the dirt in the parts that matter most.
  • Access. The crew opens access ports or panels so the whole run can be reached and inspected.
  • Containment. A vacuum that exhausts outdoors, or one with HEPA filtration if it exhausts indoors. Floors and furniture are covered.
  • Proof. Ask to see inside the ducts before and after.
  • Price. The EPA's typical range is $450 to $1,000 a system. Be wary of an offer far below that, and check it covers the whole system.

What to decline

  • Biocides and "sanitizing" sprays. The EPA says research has not shown they work in ducts, or what breathing them does. CMHC advises declining offers to spray or fog ducts.
  • Sealants sprayed inside the ducts to "encapsulate" dust. The EPA says their safety and usefulness are still in question.
  • Claims that cleaning will lower your bills. The EPA found little evidence that cleaning the ducts alone improves efficiency.
  • A mold finding with nothing to show. Ask to see it, and ask for a lab test of a sample before paying for treatment.

Where the same money does more

  • A better filter, changed on time. It catches dust before it reaches the ducts. Which rating to buy.
  • Sealing the ducts. Mastic or metal tape on the joints, never cloth duct tape, which does not last. Start with anything in an attic, crawlspace or garage.
  • A duct leakage test. It measures how much air the ducts lose and shows whether sealing worked. How the test works.
  • Service for the furnace and air conditioner. The EPA notes that cleaning the blower, coils and heat exchanger can improve efficiency, where cleaning the ducts alone has little evidence behind it.

What leaky ducts cost where you live

ENERGY STAR says about 20% to 30% of the air moving through a typical duct system is lost through leaks, holes and poor connections. This is what that share of a year's heating and cooling comes to for a detached house of 1,600 sq ft built between 1966 and 1980, in the places where most homes heat with a furnace.

Yearly cost of duct leakage as a share of heating and cooling
Metro areaA year of heating and coolingIf 20% never reaches the roomsIf 30% never reaches the rooms
New York City $1,770Gas furnace, mid-efficiency$350$530
Los Angeles $660Gas furnace, mid-efficiency$135$200
Chicago $1,200Gas furnace, mid-efficiency$240$360
Dallas–Fort Worth $1,240Gas furnace, mid-efficiency$250$370
Greater Houston $1,100Gas furnace, mid-efficiency$220$330
Atlanta $1,210Gas furnace, mid-efficiency$240$360
Washington, DC $1,490Gas furnace, mid-efficiency$295$450
Miami $1,320Gas furnace, mid-efficiency$265$400
Philadelphia $1,430Gas furnace, mid-efficiency$285$430
Phoenix $1,170Gas furnace, mid-efficiency$235$350
All 26 metro areas
Yearly cost of duct leakage as a share of heating and cooling: every place we cover
Metro areaA year of heating and coolingIf 20% never reaches the roomsIf 30% never reaches the rooms
New York City $1,770Gas furnace, mid-efficiency$350$530
Los Angeles $660Gas furnace, mid-efficiency$135$200
Chicago $1,200Gas furnace, mid-efficiency$240$360
Dallas–Fort Worth $1,240Gas furnace, mid-efficiency$250$370
Greater Houston $1,100Gas furnace, mid-efficiency$220$330
Atlanta $1,210Gas furnace, mid-efficiency$240$360
Washington, DC $1,490Gas furnace, mid-efficiency$295$450
Miami $1,320Gas furnace, mid-efficiency$265$400
Philadelphia $1,430Gas furnace, mid-efficiency$285$430
Phoenix $1,170Gas furnace, mid-efficiency$235$350
Boston $2,360Gas furnace, mid-efficiency$470$710
Riverside $1,120Gas furnace, mid-efficiency$225$340
San Francisco $910Gas furnace, mid-efficiency$185$275
Detroit $1,210Gas furnace, mid-efficiency$240$360
Seattle $1,180Gas furnace, mid-efficiency$235$350
Minneapolis–St. Paul $1,310Gas furnace, mid-efficiency$260$390
Tampa $830Gas furnace, mid-efficiency$165$250
San Diego $660Gas furnace, mid-efficiency$135$200
Denver $1,120Gas furnace, mid-efficiency$225$330
Orlando $790Gas furnace, mid-efficiency$155$235
Charlotte $1,110Gas furnace, mid-efficiency$225$330
Baltimore $1,370Gas furnace, mid-efficiency$275$410
St. Louis $1,370Gas furnace, mid-efficiency$275$410
San Antonio $1,110Gas furnace, mid-efficiency$225$330
Austin $1,160Gas furnace, mid-efficiency$230$350
Portland $1,130Gas furnace, mid-efficiency$225$340

This is the most the leaks can cost, for ducts that run outside the heated and cooled part of the house (an attic, a crawlspace, a garage). Where ducts run inside it, such as a heated basement, most of the leaked heat still ends up indoors, though not in the rooms it was meant for. Across these 26 places the lower share comes to $135 to $470 a year and the higher to $200 to $710 a year.

Before you book

  1. Name the reason: mold you can see, vermin, or debris. If there is none, spend the money on a filter and sealing.
  2. Ask what is included: every duct, the blower, the coils and the drain pan.
  3. Ask how long it will take and how many people will come.
  4. Get the price in writing, for the whole job, before anyone arrives.
  5. Decline sprays and sealants unless a specific problem has been shown to you.
  6. Check the furnace filter and the registers afterwards, and ask to see inside the ducts.

Questions people ask

Is duct cleaning worth it?

In most homes, no. The US EPA does not recommend cleaning ducts routinely, only as needed, and CMHC's research found little or no difference in airborne particles or airflow afterwards. It is worth it in three cases: visible mold inside the ducts, vermin, or ducts clogged with dust and debris, for example after a renovation.

How much does duct cleaning cost?

The US EPA puts a typical job at $450 to $1,000 for each heating and cooling system. Be wary of prices far below that, and check the quote covers every part of the system.

Does duct cleaning save energy?

There is little evidence that cleaning the ducts alone does. Sealing leaky ducts is what saves energy: ENERGY STAR says 20% to 30% of the air moving through a typical duct system is lost through leaks and poor connections.

How often should ducts be cleaned?

There is no schedule to follow. Clean them when there is a reason: mold you can see, signs of rodents or insects, or enough debris to block the airflow. A good furnace filter, changed on time, keeps most dust out in the first place.

Should the ducts be sprayed with a disinfectant or sealant?

Say no unless there is a specific, confirmed problem. The EPA says research has not shown these products work in ducts or what they do to health, and CMHC advises declining offers to spray or fog ducts with biocides.

Sources and how this page is kept

The table takes a year of heating (at the heating most homes in each place have) and of central air conditioning at the legal minimum efficiency for the reference house, and shows 20% and 30% of it. It is a measure of scale, not a prediction for your house: a duct leakage test gives your own figure. We don't sell or refer duct cleaning.

What was checked when: Standards, criteria and guidance · Energy prices .

Who wrote it. Edited by David Bussell. Every number on this page comes from the sources above or is worked out from them, with the date each was last checked. Found a mistake? Tell the editor and we'll fix it.

How it's paid for. On this site there are no referral fees, and we don’t pass your details to contractors. No maker pays to be in a guide, and no fee changes a pick. More about how the site runs.