Hot and humid climate · picks checked November 12, 2026

Best heat pumps for Florida, Texas and the Gulf Coast

Cooling and humidity drive your bills; attic ducts, AC health and outages drive comfort. For Dallas–Fort Worth, Greater Houston, Miami, Tampa, Orlando and the towns around them: one system to buy if performance matters most, one a handy owner can install, and the best value, for a house with ducts, a house without them, and a single room.

The three picks

Climate: hot, humid summers · checked November 12, 2026 · How we pick

A house without ducts: a wall-mounted head for a floor or an open main level (1 to 2 tons)

Best performance

Fujitsu AIRSTAGE Orion XLTH+ wall-mounted

AOUH12KTAP1 · 12,000 BTU/h (1-ton)

  • SEER2 31.5
  • EER2 16.7 on the hottest days
  • 10-year parts and compressor warranty once registered

Installed: a few thousand dollars per indoor head, up to about $8,000 (EnergySage, October 2025)

If it's not available: Mitsubishi Electric M-Series (MUZ-FX12NLHZ***)

Best do-it-yourself

MrCool DIY 5th Generation

DIY-18-HP-C-230D25-O · 18,000 BTU/h (1.5-ton)

  • SEER2 22.5
  • EER2 13.7 on the hottest days
  • 5-year parts, 7-year compressor warranty, no registration

You buy the kit and mount it; have an electrician run the circuit. Rebates almost always need a contractor.

Best value

Hisense Hi-PRO Ductless

AO-12U3T25P · 12,000 BTU/h (1-ton)

  • SEER2 30.0
  • EER2 15.4 on the hottest days
  • 10-year parts and compressor warranty once registered

Installed: a few thousand dollars per indoor head, up to about $8,000 (EnergySage, October 2025)

If it's not available: Payne and WeatherMaker D5M Series (37MPRAQ12AA3)

A house with ducts: one central system (2 to 4 tons)

Best performance

Carrier Infinity 23 Heat Pump

27VNA324A*030* · 23,800 BTU/h (2-ton)

  • SEER2 23.0
  • EER2 14.0 on the hottest days
  • 10-year parts and compressor warranty once registered

Installed: about $14,529 on average ($3,790 a ton) before incentives (EnergySage, March 2026)

If it's not available: Trane 20 TruComfort Variable Speed Heat Pump with WeatherGuard (5TWV0X36A1)

Best do-it-yourself

MrCool DIY Series

DIY-24-HP-C-230D25-O · 24,000 BTU/h (2-ton)

  • SEER2 19.4
  • EER2 11.7 on the hottest days
  • 5-year parts, 7-year compressor warranty, no registration

You buy the kit and mount it; have an electrician run the circuit. Rebates almost always need a contractor.

Best value

Rheem Endeavor Line Prestige Series RP19AY heat pump

RP19AY24AJVC · 22,800 BTU/h (2-ton)

  • SEER2 21.0
  • EER2 13.0 on the hottest days
  • 10-year parts and compressor warranty once registered

Installed: about $14,529 on average ($3,790 a ton) before incentives (EnergySage, March 2026)

If it's not available: Goodman GZV9S All-Climate Heat Pump (GZV9SA241CA*)

One room: a small wall-mounted head (half a ton to 1 ton)

Best performance

Mitsubishi Electric M-Series

MUZ-FX06NLHZ*** · 6,000 BTU/h (0.5-ton)

  • SEER2 35.0
  • EER2 21.5 on the hottest days
  • 10-year parts and compressor warranty once registered

Installed: a few thousand dollars per indoor head, up to about $8,000 (EnergySage, October 2025)

If it's not available: Carrier Infinity 35 Mini Split Heat Pump with Basepan Heater (37MPRAQ06AA3)

Best do-it-yourself

MrCool DIY 5th Generation

DIY-09-HP-C-115D25-O · 9,000 BTU/h (1-ton)

  • SEER2 23.6
  • EER2 14.0 on the hottest days
  • 5-year parts, 7-year compressor warranty, no registration

You buy the kit and mount it; have an electrician run the circuit. Rebates almost always need a contractor.

Also consider: Midea window heat pump (PWHP). No holes in the wall: it sits in a sash window and heats to −13°F. About US$2,800–3,000 through Midea distributors (Fast Company, December 2025).

Best value

Payne and WeatherMaker D5M Series

37MPRAQ06AA3 · 6,000 BTU/h (0.5-ton)

  • SEER2 35.1
  • EER2 17.5 on the hottest days
  • 10-year parts and compressor warranty once registered

Installed: a few thousand dollars per indoor head, up to about $8,000 (EnergySage, October 2025)

If it's not available: Midea MSEP Series (MOX430-06HFN10-M1H)

Rebates change from city to city; your metro page has the amounts and the rules: Austin, Dallas–Fort Worth, Greater Houston, Miami, Orlando, San Antonio, Tampa.

Why each pick won

Every system here is certified by ENERGY STAR (list pulled October 19, 2026) and passed the same gates. The numbers are ENERGY STAR's for the exact outdoor and indoor pairing; warranty terms are the maker's for the US. How we pick explains the gates and the weights, and the buying guide covers sizing, costs, rebates and the quote.

A house without ducts: a wall-mounted head for a floor or an open main level (1 to 2 tons)

Best performance · no ducts

Fujitsu AIRSTAGE Orion XLTH+ wall-mounted

Outdoor AOUH12KTAP1 · indoor ASUH12KTAS · AHRI 216018256

Why it won
  • Highest score of the 131 certified systems that passed our gates for this zone and size.
  • SEER2 31.5
  • EER2 16.7 on the hottest days
  • 10-year parts and compressor warranty once registered
  • ENERGY STAR Most Efficient.
What to watch
  • The longer warranty needs registration within the maker’s deadline (usually 60 or 90 days after installation). Do it the week it goes in.
  • Sizing decides comfort more than the badge: ask for a room-by-room heat-loss calculation, not a rule of thumb.
  • The maker's cold-weather claim, in its own words: “Heating down to -22°F (-30°C) without sacrificing heating capacity at low outdoor temperatures”; heating operation range “-22°F to 75°F (-30°C to 24°C)”

Runner-up from another brand: Mitsubishi Electric M-Series (MUZ-FX12NLHZ***): COP 2.20 at 5°F, keeps 123% of its heat there, SEER2 29.9.

Fujitsu: warranty, lines and every certified model

Certified ratings for Fujitsu AIRSTAGE Orion XLTH+ wall-mounted
Cooling capacity12,000 BTU/h (1-ton)
Heat at 47°F, rated15,300 BTU/h
Heat at 5°F, maximum16,200 BTU/h (106% of rated)
COP at 5°F2.62
HSPF2 / SEER2 / EER213.7 / 31.5 / 16.7
Refrigerant, compressorR-32, continuously variable
Warranty (US)10-year parts and compressor warranty once registered
Brand's price rangeBudget to premium

Best do-it-yourself · no ducts

MrCool DIY 5th Generation

Outdoor DIY-18-HP-C-230D25-O · indoor DIY-18-HP-WMAH-230D25-O · AHRI 216032545

Why it won
  • Sold for homeowner installation: pre-charged quick-connect line sets, and a warranty with no registration that covers owner installs in the US and Canada.
  • SEER2 22.5
  • EER2 13.7 on the hottest days
  • 5-year parts, 7-year compressor warranty, no registration
  • ENERGY STAR Most Efficient.
What to watch
  • Check your local permit and electrical rules before you buy; the new circuit is an electrician’s job.
  • Most rebates pay only through a participating or licensed contractor, so expect no rebate on a self-install.
  • The outdoor unit needs its own 240-volt circuit: hire an electrician for that part, with a permit.
  • The maker's cold-weather claim, in its own words: Warmth even at –13°F

MrCool: warranty, lines and every certified model

Certified ratings for MrCool DIY 5th Generation
Cooling capacity18,000 BTU/h (1.5-ton)
Heat at 47°F, rated18,000 BTU/h
Heat at 5°F, maximum12,800 BTU/h (71% of rated)
COP at 5°F2.44
HSPF2 / SEER2 / EER211.5 / 22.5 / 13.7
Refrigerant, compressorR-454B, continuously variable
Warranty (US)5-year parts, 7-year compressor warranty, no registration
Brand's price rangeBudget

Best value · no ducts

Hisense Hi-PRO Ductless

Outdoor AO-12U3T25P · indoor AS-12U3THE25P · AHRI 217727404

Why it won
  • Highest score among brands in the mid price tier, out of the same 131 systems.
  • SEER2 30.0
  • EER2 15.4 on the hottest days
  • 10-year parts and compressor warranty once registered
  • ENERGY STAR Most Efficient.
What to watch
  • The longer warranty needs registration within the maker’s deadline (usually 60 or 90 days after installation). Do it the week it goes in.
  • Sizing decides comfort more than the badge: ask for a room-by-room heat-loss calculation, not a rule of thumb.
  • The maker's cold-weather claim, in its own words: Heating operation range -22°F (-30°C) to 75°F (24°C)

Runner-up from another brand: Payne and WeatherMaker D5M Series (37MPRAQ12AA3): COP 2.00 at 5°F, keeps 113% of its heat there, SEER2 29.5.

Hisense: warranty, lines and every certified model

Certified ratings for Hisense Hi-PRO Ductless
Cooling capacity12,000 BTU/h (1-ton)
Heat at 47°F, rated12,000 BTU/h
Heat at 5°F, maximum12,200 BTU/h (102% of rated)
COP at 5°F2.25
HSPF2 / SEER2 / EER211.8 / 30.0 / 15.4
Refrigerant, compressorR-454B, continuously variable
Warranty (US)10-year parts and compressor warranty once registered
Brand's price rangeMid-range

Price: Installed: a few thousand dollars per indoor head, up to about $8,000 (EnergySage (updated October 29, 2025)). We show ranges for the type of system, not prices per model: installed prices depend far more on the house and the contractor than on the badge.

A house with ducts: one central system (2 to 4 tons)

Best performance · house with ducts

Carrier Infinity 23 Heat Pump

Outdoor 27VNA324A*030* · indoor CVAMA4421XMA*+UI · AHRI 217624611

Why it won
  • Highest score of the 104 certified systems that passed our gates for this zone and size.
  • SEER2 23.0
  • EER2 14.0 on the hottest days
  • 10-year parts and compressor warranty once registered
  • ENERGY STAR Most Efficient.
What to watch
  • The longer warranty needs registration within the maker’s deadline (usually 60 or 90 days after installation). Do it the week it goes in.
  • Sizing decides comfort more than the badge: ask for a room-by-room heat-loss calculation, not a rule of thumb.
  • The maker's cold-weather claim, in its own words: 'Heating mode operation down to -13°F (-25°C) outdoor ambient temperature' (Carrier product data 27VNA3-02PD)
  • Have the installer check that the existing ducts can carry the airflow a heat pump needs.

Runner-up from another brand: Trane 20 TruComfort Variable Speed Heat Pump with WeatherGuard (5TWV0X36A1): COP 2.20 at 5°F, keeps 77% of its heat there, SEER2 21.0.

Carrier: warranty, lines and every certified model

Certified ratings for Carrier Infinity 23 Heat Pump
Cooling capacity23,800 BTU/h (2-ton)
Heat at 47°F, rated27,600 BTU/h
Heat at 5°F, maximum22,400 BTU/h (81% of rated)
COP at 5°F2.06
HSPF2 / SEER2 / EER29.5 / 23.0 / 14.0
Refrigerant, compressorR-454B, continuously variable
Warranty (US)10-year parts and compressor warranty once registered
Brand's price rangeBudget to premium

Best do-it-yourself · house with ducts

MrCool DIY Series

Outdoor DIY-24-HP-C-230D25-O · indoor DIY-24-HP-MUAH-230D25-O · AHRI 217166077

Why it won
  • Sold for homeowner installation: pre-charged quick-connect line sets, and a warranty with no registration that covers owner installs in the US and Canada.
  • SEER2 19.4
  • EER2 11.7 on the hottest days
  • 5-year parts, 7-year compressor warranty, no registration
  • ENERGY STAR Most Efficient.
What to watch
  • Check your local permit and electrical rules before you buy; the new circuit is an electrician’s job.
  • Most rebates pay only through a participating or licensed contractor, so expect no rebate on a self-install.
  • The outdoor unit needs its own 240-volt circuit: hire an electrician for that part, with a permit.
  • Have the installer check that the existing ducts can carry the airflow a heat pump needs.

MrCool: warranty, lines and every certified model

Certified ratings for MrCool DIY Series
Cooling capacity24,000 BTU/h (2-ton)
Heat at 47°F, rated24,000 BTU/h
Heat at 5°F, maximum18,000 BTU/h (75% of rated)
COP at 5°F2.10
HSPF2 / SEER2 / EER29.1 / 19.4 / 11.7
Refrigerant, compressorR-454B, continuously variable
Warranty (US)5-year parts, 7-year compressor warranty, no registration
Brand's price rangeBudget

Best value · house with ducts

Rheem Endeavor Line Prestige Series RP19AY heat pump

Outdoor RP19AY24AJVC · indoor RCFY2421HEAAM · AHRI 216050995

Why it won
  • Highest score among brands in the mid price tier, out of the same 104 systems.
  • SEER2 21.0
  • EER2 13.0 on the hottest days
  • 10-year parts and compressor warranty once registered
  • ENERGY STAR Most Efficient.
What to watch
  • The longer warranty needs registration within the maker’s deadline (usually 60 or 90 days after installation). Do it the week it goes in.
  • Sizing decides comfort more than the badge: ask for a room-by-room heat-loss calculation, not a rule of thumb.
  • Have the installer check that the existing ducts can carry the airflow a heat pump needs.

Runner-up from another brand: Goodman GZV9S All-Climate Heat Pump (GZV9SA241CA*): COP 2.40 at 5°F, keeps 100% of its heat there, SEER2 21.0.

Rheem: warranty, lines and every certified model

Certified ratings for Rheem Endeavor Line Prestige Series RP19AY heat pump
Cooling capacity22,800 BTU/h (2-ton)
Heat at 47°F, rated24,000 BTU/h
Heat at 5°F, maximum18,600 BTU/h (78% of rated)
COP at 5°F1.80
HSPF2 / SEER2 / EER210.0 / 21.0 / 13.0
Refrigerant, compressorR-454B, continuously variable
Warranty (US)10-year parts and compressor warranty once registered
Brand's price rangeMid-range

Price: Installed: about $14,529 on average ($3,790 a ton) before incentives (EnergySage marketplace quotes (updated March 19, 2026)). We show ranges for the type of system, not prices per model: installed prices depend far more on the house and the contractor than on the badge.

One room: a small wall-mounted head (half a ton to 1 ton)

Best performance · one room

Mitsubishi Electric M-Series

Outdoor MUZ-FX06NLHZ*** · indoor MSZ-FX06NL*** · AHRI 215611124

Why it won
  • Highest score of the 151 certified systems that passed our gates for this zone and size.
  • SEER2 35.0
  • EER2 21.5 on the hottest days
  • 10-year parts and compressor warranty once registered
  • ENERGY STAR Most Efficient.
What to watch
  • The longer warranty needs registration within the maker’s deadline (usually 60 or 90 days after installation). Do it the week it goes in.
  • Sizing decides comfort more than the badge: ask for a room-by-room heat-loss calculation, not a rule of thumb.

Runner-up from another brand: Carrier Infinity 35 Mini Split Heat Pump with Basepan Heater (37MPRAQ06AA3): COP 2.00 at 5°F, keeps 150% of its heat there, SEER2 35.1.

Mitsubishi Electric: warranty, lines and every certified model

Certified ratings for Mitsubishi Electric M-Series
Cooling capacity6,000 BTU/h (0.5-ton)
Heat at 47°F, rated9,000 BTU/h
Heat at 5°F, maximum12,600 BTU/h (140% of rated)
COP at 5°F2.38
HSPF2 / SEER2 / EER213.0 / 35.0 / 21.5
Refrigerant, compressorR-454B, continuously variable
Warranty (US)10-year parts and compressor warranty once registered
Brand's price rangePremium

Best do-it-yourself · one room

MrCool DIY 5th Generation

Outdoor DIY-09-HP-C-115D25-O · indoor DIY-09-HP-WMAH-115D25-O · AHRI 216032543

Why it won
  • Sold for homeowner installation: pre-charged quick-connect line sets, and a warranty with no registration that covers owner installs in the US and Canada.
  • SEER2 23.6
  • EER2 14.0 on the hottest days
  • 5-year parts, 7-year compressor warranty, no registration
  • ENERGY STAR Most Efficient.
What to watch
  • Check your local permit and electrical rules before you buy; the new circuit is an electrician’s job.
  • Most rebates pay only through a participating or licensed contractor, so expect no rebate on a self-install.
  • This size runs on 115 volts but still wants its own circuit: have an electrician check the panel.
  • The maker's cold-weather claim, in its own words: Warmth even at –13°F

MrCool: warranty, lines and every certified model

Certified ratings for MrCool DIY 5th Generation
Cooling capacity9,000 BTU/h (1-ton)
Heat at 47°F, rated10,000 BTU/h
Heat at 5°F, maximum7,300 BTU/h (73% of rated)
COP at 5°F2.17
HSPF2 / SEER2 / EER211.5 / 23.6 / 14.0
Refrigerant, compressorR-454B, continuously variable
Warranty (US)5-year parts, 7-year compressor warranty, no registration
Brand's price rangeBudget

Best value · one room

Payne and WeatherMaker D5M Series

Outdoor 37MPRAQ06AA3 · indoor D5MPHAQ06XA3 · AHRI 215413153

Why it won
  • Highest score among brands in the budget price tier, out of the same 151 systems.
  • SEER2 35.1
  • EER2 17.5 on the hottest days
  • 10-year parts and compressor warranty once registered
  • ENERGY STAR Most Efficient.
What to watch
  • The longer warranty needs registration within the maker’s deadline (usually 60 or 90 days after installation). Do it the week it goes in.
  • Sizing decides comfort more than the badge: ask for a room-by-room heat-loss calculation, not a rule of thumb.

Runner-up from another brand: Midea MSEP Series (MOX430-06HFN10-M1H): COP 2.00 at 5°F, keeps 150% of its heat there, SEER2 35.1.

Payne and WeatherMaker: warranty, lines and every certified model

Certified ratings for Payne and WeatherMaker D5M Series
Cooling capacity6,000 BTU/h (0.5-ton)
Heat at 47°F, rated9,000 BTU/h
Heat at 5°F, maximum13,500 BTU/h (150% of rated)
COP at 5°F2.00
HSPF2 / SEER2 / EER215.6 / 35.1 / 17.5
Refrigerant, compressorR-454B, continuously variable
Warranty (US)10-year parts and compressor warranty once registered
Brand's price rangeBudget

Price: Installed: a few thousand dollars per indoor head, up to about $8,000 (EnergySage (updated October 29, 2025)). We show ranges for the type of system, not prices per model: installed prices depend far more on the house and the contractor than on the badge.

Before you sign a quote

  1. Ask for a room-by-room heat-loss calculation (Manual J) and the AHRI certificate for the exact outdoor and indoor pairing quoted.
  2. Check the pairing against the rebate's list: ENERGY STAR, plus any cold-climate or efficiency rule your utility sets.
  3. Ask how backup heat is set: it should switch on only below the temperature the heat pump can no longer carry the house.
  4. Get the permit and registration in writing: who registers the warranty, and by when.
  5. Compare at least two quotes for the same pairing, or a close match from the runner-up.

Other zones

The picks change with the climate. Find your zone by ZIP code or pick one:

Find installers for one of these picks

Tell us about your home and what you want to heat or cool. A person reads every request and replies by email with the contractors and rebate programs that serve your ZIP code; we don’t send your details to installers.

We use these details only to answer this request. Privacy

Sources