Buying guide · Air filters and purifiers · 2026

Air filter and purifier buying guide for the United States

Filtration is two decisions: the filter in the furnace or air handler, and whether to add a portable cleaner in the rooms you use most. This guide covers both, with the rating to buy, the size to buy and what the fan costs to run in 26 US metro areas.

The short version

  • Measure first. A filter removes particles; it does nothing for radon, carbon monoxide or damp.
  • Furnace filter: MERV 13 if the system can take it, on the US EPA's advice. Check with a technician before going denser.
  • Portable cleaner: a HEPA unit with a smoke CADR of at least two-thirds of the room's area in square feet (80 for a 120 sq ft room).
  • A filter only works while air moves through it. Every 100 watts of fan running all year costs $130 to $295 a year.
  • Skip anything that produces ozone.

Do you need more filtration?

  • Yes, if smoke reaches you in fire season, someone in the house has asthma or allergies, or you live beside a busy road. What to do about dust and smoke.
  • First, stop the source. A range hood that vents outdoors and no smoking indoors come before any filter.
  • It is the wrong tool for radon, carbon monoxide, mold or stuffy air. Those need a radon test, a CO alarm, a moisture fix or ventilation.

Measure before you buy

An air quality monitor that reads fine particles (PM2.5) shows whether you have a problem, when it happens and whether the fix worked.

The furnace or air handler filter

MERV is the filter's rating: the higher the number, the smaller the particles it catches. These are the minimum shares caught at each rating, from the US EPA's table.

Share of particles caught by MERV rating
RatingFine (0.3 to 1 micron): smokeMedium (1 to 3 microns)Coarse (3 to 10 microns): dust, pollen
MERV 8 not rated 20% or more 70% or more
MERV 11 20% or more 65% or more 85% or more
MERV 13 50% or more 85% or more 90% or more
MERV 16 95% or more 95% or more 95% or more
  • Buy MERV 13 if the system can take it. That is the US EPA's advice: at least MERV 13, or as high as the fan and filter slot allow.
  • Check before going denser. CMHC notes some higher-rated filters cut airflow and affect how the furnace performs. Ask about a deeper filter cabinet: a thicker filter has more surface, which eases the airflow at the same rating.
  • Change it on time. NRCan's guidance is to change or clean a forced-air filter every three months, or sooner if it is loaded.
  • HEPA is not a MERV rating. A HEPA filter catches 99.97% of particles at 0.3 microns. HEPA filters are used in portable cleaners, not in a standard furnace filter slot.

Portable air cleaners

  • Size it by CADR. Health Canada: a smoke CADR of at least two-thirds of the room's floor area in square feet. A 120 sq ft bedroom needs 80 or more; a 300 sq ft living room needs 200.
  • Buy certified figures. Look for a CADR certified by the Association of Home Appliance Manufacturers (AHAM).
  • Carbon is for gases. Some units add activated carbon for odors and vapors. Health Canada notes there is no widely used rating for those filters, so treat the claims with care.
  • Place it where you are. Run it in the room you spend the most time in, with doors and windows closed, and keep the airflow clear of furniture.
  • Count the filters. Check the replacement filter's price and how often it is needed before you buy.

What the fan costs to run where you live

A filter cleans air only while the fan is running, so more filtration means more fan hours. This is what a fan costs when it runs all year, at each place's electricity price.

Yearly cost of running a fan for filtration
Metro areaElectricity, per kWhEach 100 watts of fan, all yearA 40-watt portable cleaner, all year
New York City 29.9¢$260$105
Los Angeles 33.6¢$295$120
Chicago 19.2¢$170$65
Dallas–Fort Worth 15.9¢$140$55
Greater Houston 15.9¢$140$55
Atlanta 16.3¢$145$55
Washington, DC 25.2¢$220$90
Miami 15.0¢$130$55
Philadelphia 21.7¢$190$75
Phoenix 15.4¢$135$55
All 26 metro areas
Yearly cost of running a fan for filtration: every place we cover
Metro areaElectricity, per kWhEach 100 watts of fan, all yearA 40-watt portable cleaner, all year
New York City 29.9¢$260$105
Los Angeles 33.6¢$295$120
Chicago 19.2¢$170$65
Dallas–Fort Worth 15.9¢$140$55
Greater Houston 15.9¢$140$55
Atlanta 16.3¢$145$55
Washington, DC 25.2¢$220$90
Miami 15.0¢$130$55
Philadelphia 21.7¢$190$75
Phoenix 15.4¢$135$55
Boston 30.5¢$265$105
Riverside 33.6¢$295$120
San Francisco 33.6¢$295$120
Detroit 23.1¢$200$80
Seattle 14.7¢$130$50
Minneapolis–St. Paul 17.4¢$155$60
Tampa 15.0¢$130$55
San Diego 33.6¢$295$120
Denver 17.0¢$150$60
Orlando 15.0¢$130$55
Charlotte 15.2¢$135$55
Baltimore 21.4¢$190$75
St. Louis 16.1¢$140$55
San Antonio 15.9¢$140$55
Austin 15.9¢$140$55
Portland 16.0¢$140$55

Find the wattage on your furnace's or cleaner's label and scale from the 100-watt column. If you run the furnace fan continuously, the motor matters: NRCan says a brushless DC (ECM) motor can cut a furnace's electricity use by more than 70% in continuous circulation. With an older motor, a portable cleaner in the bedroom is usually the cheaper way to get clean air overnight.

What to avoid

  • Ozone generators. Health Canada and the US EPA both advise against devices that produce ozone.
  • Ionizers and electrostatic precipitators that are not certified as low-ozone. The EPA notes they can emit ozone as a by-product.
  • Claims about viruses, mold or "all pollutants". The EPA is plain that no air cleaner or filter removes everything.
  • Duct cleaning sold as an air quality fix. When duct cleaning is worth it.

Before you buy

  1. Measure fine particles for a week, including while cooking and on a smoky or high-pollen day.
  2. Note the size printed on the furnace filter and the depth of the slot.
  3. Ask a technician whether the system can take MERV 13, or whether a deeper filter cabinet is needed.
  4. For a portable cleaner: the room's area, the certified smoke CADR, the wattage and the filter price.
  5. Check it does not produce ozone.

Questions people ask

What MERV rating should I buy?

The US EPA advises a filter rated at least MERV 13, or as high as your system's fan and filter slot can take. A MERV 13 filter catches 50% or more of the finest particles it is tested on (0.3 to 1 micron), where a MERV 8 filter is not rated for them at all. A denser filter can cut airflow, so ask a technician before going up a step.

How big an air purifier do I need?

Match the clean air delivery rate (CADR) to the room. Health Canada's rule is a smoke CADR of at least two-thirds of the room's area in square feet: a 120 sq ft bedroom needs a CADR of at least 80. The rating assumes a ceiling of eight feet, so go larger for higher ceilings.

Do air purifiers use a lot of electricity?

It depends on your price. Every 100 watts running all year costs $130 to $295 a year (least in Seattle, most in San Diego). Check the wattage on the label of the furnace or the cleaner and scale from the table.

Are ionizers and ozone generators safe?

Avoid anything that makes ozone on purpose. Health Canada and the US EPA both say so: ozone can harm your health. The EPA adds that ionizers and electrostatic precipitators can produce it as a by-product. A filter and a fan do the job without that risk.

Will a better filter fix my air quality?

It removes particles: dust, pollen, smoke. It does nothing for gases such as radon or carbon monoxide, and little for moisture. Measure first so you know which problem you have.

Sources and how this page is kept

Fan costs are the wattage shown, running 8,760 hours, at each place's marginal electricity price. Filter ratings are the US EPA's summary of the ASHRAE test. We don't test filters or air cleaners in a lab; first-hand tests of monitors are planned and will be reported on the product pages.

What was checked when: Standards, criteria and guidance · Energy prices .

Who wrote it. Edited by David Bussell. Every number on this page comes from the sources above or is worked out from them, with the date each was last checked. Found a mistake? Tell the editor and we'll fix it.

How it's paid for. On this site there are no referral fees, and we don’t pass your details to contractors. No maker pays to be in a guide, and no fee changes a pick. More about how the site runs.