Yukon · Energy · checked September 28, 2026

Thermal imaging inspections in Whitehorse

An infrared camera shows missing insulation, air leaks and damp spots without opening a wall, but only when it's at least 10°C colder outside than inside. Whitehorse's long heating season gives you months of good scanning weather.

Hands holding an infrared camera aimed at a ceiling corner beside a frosty window; the screen shows a cold streak

Cost

Usually included; confirm

Best conditions

≥10°C inside/outside difference

Winter design temperature

−36.4°C

Houses built before 1961

8%

How Whitehorse is built

Whitehorse's houses by when they were built Ten house shapes, one for each tenth of Whitehorse's 9,485 houses. Before 1961: 8%, 1961–1990: 41%, 1991–2000: 16%, 2001 or later: 35%. Older houses glow hotter.
  • Before 1961 8%
  • 1961–1990 41%
  • 1991–2000 16%
  • 2001 or later 35%
Each house stands for one in ten of Whitehorse's 9,485 houses (single-detached, semi-detached, row and duplex), drawn by when it was built. The glow shows the usual pattern: older houses tend to be leakier and less insulated. Snowfall scales with heating degree-days. Sources: Statistics Canada 2021 Census (table 98-10-0233-01), NRCan HOT2000 climate data.

When to book in Whitehorse

Whitehorse gets about 6,522 heating degree-days a year and has a winter design temperature of −36.4°C, according to NRCan's HOT2000 climate data for Whitehorse. That gives Whitehorse a long window, roughly late fall to early spring, when the inside-outside difference comfortably exceeds the 10°C an infrared scan needs.

A 1950s brick bungalow on a snowy suburban street at dusk, lamplight in the front window
The same bungalow as an infrared camera sees it: heat glowing around the door, window frames, eaves and the rim joist above the foundation
Illustration: the same house in visible light and in infrared. A winter scan shows where heat escapes: door and window edges, the eaves, and the rim joist above the foundation.

What the camera finds in Whitehorse houses

Of Whitehorse's 9,485 houses (single-detached, semi-detached, row houses and duplexes), 8% were built before 1961 and 48% before 1991, according to the 2021 Census. Older houses are where the camera earns its keep: empty or settled wall cavities, gaps at the top of walls, and cold corners where framing bridges the insulation. Run it with the blower door test depressurizing the house and every leak shows up as a cold streak.

What it costs

Most EnerGuide advisors include an infrared scan with the evaluation, but it isn't required, so confirm when you book. Yukon's Good Energy program arranges reduced-cost assessments with local energy advisors: $50 for a pre-renovation assessment and $50 for the return visit.

NRCan-licensed service organizations serving Whitehorse

In Yukon, the territorial government's Energy Branch is the licensed service organization and arranges assessments with local energy advisors.

Most EnerGuide advisors bring an infrared camera, but it isn't a required part of the evaluation, so confirm when you book. The scan is most useful with the blower door running.

  • Government of Yukon Energy Mines and Resources
    867-393-7063 100% of Whitehorse

Source: NRCan list of licensed service organizations, checked September 28, 2026. Call to confirm your street is covered and ask about wait times.

Thermal imaging inspection in Whitehorse: common questions

When is the best time for a thermal imaging inspection in Whitehorse?

Late fall through early spring, when it is at least 10°C colder outside than inside. Cold, overcast days with no direct sun on the walls give the clearest images.

Can a thermal camera see through walls?

No. It reads surface temperatures. Missing insulation or an air leak shows up because it changes the temperature of the wall or ceiling surface.

Who does thermal imaging in Whitehorse?

Most of the 1 NRCan-licensed organizations serving Whitehorse bring an infrared camera to an EnerGuide evaluation; confirm when you book.

Thermal imaging inspection near Whitehorse

Get matched with a registered advisor in Whitehorse

Tell us your postal code and what you’re planning. We’ll connect you with one licensed service organization serving your area. No spam, no shared lead lists.

Email us what you’re planning, your postal code and the type of building (a house, a duplex or triplex, or a larger multi-unit building) — we’ll reply with registered service organizations for your area and which rebates apply.

Email dave@clickshift.ca

This inbox is answered by a person. Participating advisors pay us a referral fee — you pay nothing, and it never affects the directory.