How Lethbridge is built
- Before 1961 19%
- 1961–1990 35%
- 1991–2000 11%
- 2001 or later 35%
When to book in Lethbridge
Lethbridge gets about 4,274 heating degree-days a year and has a winter design temperature of −26.1°C, according to NRCan's HOT2000 climate data for Lethbridge. That gives Lethbridge a long window, roughly late fall to early spring, when the inside-outside difference comfortably exceeds the 10°C an infrared scan needs.
What the camera finds in Lethbridge houses
Of Lethbridge's 33,945 houses (single-detached, semi-detached, row houses and duplexes), 19% were built before 1961 and 54% before 1991, according to the 2021 Census. Older houses are where the camera earns its keep: empty or settled wall cavities, gaps at the top of walls, and cold corners where framing bridges the insulation. Run it with the blower door test depressurizing the house and every leak shows up as a cold streak.
What it costs
Most EnerGuide advisors include an infrared scan with the evaluation, but it isn't required, so confirm when you book. There's no provincial rebate or price list; the City of Edmonton's guidance is to expect more than $400 and to get two or three quotes.
NRCan-licensed service organizations serving Lethbridge
Most EnerGuide advisors bring an infrared camera, but it isn't a required part of the evaluation, so confirm when you book. The scan is most useful with the blower door running.
- Acacia Engineering
- Air Barrier Canada
- AmeriSpec Profile
- Buildingexpert
- Clean Energy Solutions
- CoEfficient Building Science
- Energy Werx Profile
- EnerHome Consulting
- EnerQuality
- EnerSolution Profile
- GETS Energy
- Green Think
- Isle Energy Consulting
- Map Energy
- Sensible Home Inspections
- The Energuy Profile
- The Home Inspectors Group Profile
- VerdaTech Energy Management and Consulting
- EnerVision
- Homesol Building Solutions
- NRGwise (A1 NRGwise Consulting) Profile
Thermal imaging inspection in Lethbridge: common questions
When is the best time for a thermal imaging inspection in Lethbridge?
Late fall through early spring, when it is at least 10°C colder outside than inside. Cold, overcast days with no direct sun on the walls give the clearest images.
Can a thermal camera see through walls?
No. It reads surface temperatures. Missing insulation or an air leak shows up because it changes the temperature of the wall or ceiling surface.
Who does thermal imaging in Lethbridge?
Most of the 21 NRCan-licensed organizations serving Lethbridge bring an infrared camera to an EnerGuide evaluation; confirm when you book.