Alberta · Energy · checked September 28, 2026

Thermal imaging inspections in Edmonton

An infrared camera shows missing insulation, air leaks and damp spots without opening a wall, but only when it's at least 10°C colder outside than inside. Edmonton's long heating season gives you months of good scanning weather.

Get matched in Edmonton → How an infrared scan works
Hands holding an infrared camera aimed at a ceiling corner beside a frosty window; the screen shows a cold streak

Cost

Usually included; confirm

Best conditions

≥10°C inside/outside difference

Winter design temperature

−30.8°C

Houses built before 1961

15%

How Edmonton is built

Edmonton's houses by when they were built Ten house shapes, one for each tenth of Edmonton's 275,750 houses. Before 1961: 15%, 1961–1990: 37%, 1991–2000: 10%, 2001 or later: 39%. Older houses glow hotter.
  • Before 1961 15%
  • 1961–1990 37%
  • 1991–2000 10%
  • 2001 or later 39%
Each house stands for one in ten of Edmonton's 275,750 houses (single-detached, semi-detached, row and duplex), drawn by when it was built. The glow shows the usual pattern: older houses tend to be leakier and less insulated. Snowfall scales with heating degree-days. Sources: Statistics Canada 2021 Census (table 98-10-0233-01), NRCan HOT2000 climate data.

When to book in Edmonton

Edmonton gets about 5,668 heating degree-days a year and has a winter design temperature of −30.8°C, according to NRCan's HOT2000 climate data for Edmonton International, the closest comparable location in that data set (26 km away). That gives Edmonton a long window, roughly late fall to early spring, when the inside-outside difference comfortably exceeds the 10°C an infrared scan needs.

A 1950s brick bungalow on a snowy suburban street at dusk, lamplight in the front window
The same bungalow as an infrared camera sees it: heat glowing around the door, window frames, eaves and the rim joist above the foundation
Illustration: the same house in visible light and in infrared. A winter scan shows where heat escapes: door and window edges, the eaves, and the rim joist above the foundation.

What the camera finds in Edmonton houses

Of Edmonton's 275,750 houses (single-detached, semi-detached, row houses and duplexes), 15% were built before 1961 and 52% before 1991, according to the 2021 Census. Older houses are where the camera earns its keep: empty or settled wall cavities, gaps at the top of walls, and cold corners where framing bridges the insulation. Run it with the blower door test depressurizing the house and every leak shows up as a cold streak.

What it costs

Most EnerGuide advisors include an infrared scan with the evaluation, but it isn't required, so confirm when you book. There's no provincial rebate or price list; the City of Edmonton's guidance is to expect more than $400 and to get two or three quotes.

NRCan-licensed service organizations serving Edmonton

Most EnerGuide advisors bring an infrared camera, but it isn't a required part of the evaluation, so confirm when you book. The scan is most useful with the blower door running.

Source: NRCan list of licensed service organizations, checked September 28, 2026. Call to confirm your street is covered and ask about wait times.

Thermal imaging inspection in Edmonton: common questions

When is the best time for a thermal imaging inspection in Edmonton?

Late fall through early spring, when it is at least 10°C colder outside than inside. Cold, overcast days with no direct sun on the walls give the clearest images.

Can a thermal camera see through walls?

No. It reads surface temperatures. Missing insulation or an air leak shows up because it changes the temperature of the wall or ceiling surface.

Who does thermal imaging in Edmonton?

Most of the 27 NRCan-licensed organizations serving Edmonton bring an infrared camera to an EnerGuide evaluation; confirm when you book.

Thermal imaging inspection near Edmonton

Thermal imaging inspection in Sherwood Park21 kmThermal imaging inspection in Red Deer144 kmThermal imaging inspection in Calgary280 kmThermal imaging inspection in Lethbridge433 kmThermal imaging inspection in Saskatoon486 km All 70 cities →

Sources

Checked September 28, 2026. Census figures are for the municipality (Alberta); climate data is NRCan's HOT2000 station Edmonton International (26 km away).

Get matched with a registered advisor in Edmonton

Tell us your postal code and what you’re planning. We’ll connect you with one licensed service organization serving your area. No spam, no shared lead lists.

Email us what you’re planning, your postal code and the type of building (a house, a duplex or triplex, or a larger multi-unit building) — we’ll reply with registered service organizations for your area and which rebates apply.

Email dave@clickshift.ca

This inbox is answered by a person. Participating advisors pay us a referral fee — you pay nothing, and it never affects the directory.