How Moncton is built
- Before 1961 24%
- 1961–1990 37%
- 1991–2000 12%
- 2001 or later 28%
Why the design temperature matters in Moncton
−22.1°C is the 29th-coldest design temperature of the 70 cities we cover. The F280 calculation works out how much heat each room loses on that design day, from the house's actual walls, windows, air leakage and ceiling insulation.
At −22.1°C, a cold-climate heat pump sized to the calculation can carry most of the season, and the number shows how much backup heat the coldest days need.
In the Moncton area, 34% of households heat mainly with electric baseboards; electricity is the main heating energy for 42% of households (Statistics Canada, 2023).
Why skipping it costs money
Contractors who size by square footage routinely oversize. An oversized heat pump costs more to buy, cycles on and off, dehumidifies poorly in summer and wears faster. An undersized one leans on backup heat. The F280 report is the evidence either way, and it's worth having before you compare quotes.
What it costs
About $150–$400 as a standalone calculation (a September 2026 planning range; quotes vary). Many energy advisors bundle it with an EnerGuide evaluation, which also gives the calculation measured air-leakage data instead of an assumption.
NRCan-licensed service organizations serving Moncton
Many energy advisors also do room-by-room CSA F280 calculations for an extra fee; HVAC designers do them too. Ask for the F280 report itself, not just an equipment recommendation.
- Enercheck Solutions
- Homesol Building Solutions
- RU-Green Energy Solutions
- ThermalWise Green Building Cooperative
Heat pump programs in Moncton
Heat loss calculation in Moncton: common questions
What design temperature is used for heat pump sizing in Moncton?
NRCan's HOT2000 climate data gives −22.1°C for Moncton International. Your designer may use the building code's design value for Moncton, which can differ slightly; ask which one the calculation uses.
How much does a heat loss calculation cost?
About $150–$400 standalone as a planning range; often less when bundled with an EnerGuide evaluation.
Who does F280 calculations in Moncton?
Many of the 4 NRCan-licensed organizations serving Moncton offer them, as do HVAC designers. Ask for the F280 report itself.
Do rebate programs require a heat loss calculation?
Requirements vary by program and change often. Even where it isn't required, it is the best protection against an oversized or undersized system.