How Vancouver is built
- Before 1961 31%
- 1961–1990 31%
- 1991–2000 13%
- 2001 or later 25%
Why it matters in Vancouver
In the Vancouver area, 32% of households heat mainly with a forced-air furnace, 31% with electric baseboards, 12% with a boiler and radiators and 5% with a heat pump; natural gas is the main heating energy for 42% of households and electricity for 39% (Statistics Canada, 2023).
The risk rises after air sealing: a tighter house plus a strong exhaust fan or dryer can pull exhaust back down a chimney. That's why advisors test for spillage during an evaluation and why it should be repeated after serious tightening.
The CO alarm rule in British Columbia
B.C. doesn't require CO alarms in existing homes; the province recommends them wherever there's a fuel-burning appliance, fireplace or attached garage, and the building code requires them in new homes.
The City of Vancouver's Fire By-law goes further than the province and does require CO alarms in existing homes with an attached garage or a fuel-fired appliance.
What the check involves
- Worst-case depressurization: exhaust fans and the dryer on, doors set to make the appliance room as negative as it gets.
- A spillage and draft check at each appliance, with a CO reading.
- A plan if anything fails: often a sealed-combustion appliance or a fix to the venting, done by a licensed gas or oil technician.
NRCan-licensed service organizations serving Vancouver
Energy advisors check for combustion spillage during an evaluation; fixing a venting problem is work for a licensed gas or oil technician.
- Acacia Engineering
- AmeriSpec Profile
- Canada Energy Audit Profile
- Capital Home Energy
- City Green Solutions
- Clean Energy Solutions
- CoEfficient Building Science
- Enerhold Engineering Solutions
- Enerhome Consulting
- EnerSolution Profile
- EnerTech Solutions
- Engreen Home
- ER Energy Solutions
- GETS Energy
- Green Canada Home Advisors Profile
- Greenbrain Profile
- Homesol Building Solutions
- HomeStep.ca
- HomeTech Energy Solutions
- Isle Energy Consulting
- NRGwise (A1 NRGwise Consulting) Profile
- Sensible Home Inspections
- The Energuy Profile
- VerdaTech Energy Management and Consulting
- All Season Inspection Profile
- EnerVision
- Green Think
- Energy Werx Profile
- ecoGEO Energy
Programs in Vancouver
Combustion safety test in Vancouver: common questions
Are CO alarms required in Vancouver homes?
B.C. doesn't require CO alarms in existing homes; the province recommends them wherever there's a fuel-burning appliance, fireplace or attached garage, and the building code requires them in new homes. The City of Vancouver's Fire By-law goes further than the province and does require CO alarms in existing homes with an attached garage or a fuel-fired appliance.
Who does combustion safety testing?
Energy advisors check for spillage during an EnerGuide evaluation. Repairs to venting or appliances are done by a licensed gas or oil technician.
I have CO alarms. Isn't that enough?
Alarms warn you once CO is already in the house. A spillage test finds a venting problem before it produces CO.