New Brunswick · Energy · checked September 28, 2026

Thermal imaging inspections in Saint John

An infrared camera shows missing insulation, air leaks and damp spots without opening a wall, but only when it's at least 10°C colder outside than inside. Saint John's long heating season gives you months of good scanning weather.

Get matched in Saint John → How an infrared scan works
Hands holding an infrared camera aimed at a ceiling corner beside a frosty window; the screen shows a cold streak

Cost

Usually included; confirm

Best conditions

≥10°C inside/outside difference

Winter design temperature

−22.5°C

Houses built before 1961

34%

How Saint John is built

Saint John's houses by when they were built Ten house shapes, one for each tenth of Saint John's 19,705 houses. Before 1961: 34%, 1961–1990: 44%, 1991–2000: 9%, 2001 or later: 13%. Older houses glow hotter.
  • Before 1961 34%
  • 1961–1990 44%
  • 1991–2000 9%
  • 2001 or later 13%
Each house stands for one in ten of Saint John's 19,705 houses (single-detached, semi-detached, row and duplex), drawn by when it was built. The glow shows the usual pattern: older houses tend to be leakier and less insulated. Snowfall scales with heating degree-days. Sources: Statistics Canada 2021 Census (table 98-10-0233-01), NRCan HOT2000 climate data.

When to book in Saint John

Saint John gets about 4,580 heating degree-days a year and has a winter design temperature of −22.5°C, according to NRCan's HOT2000 climate data for Saint John. That gives Saint John a long window, roughly late fall to early spring, when the inside-outside difference comfortably exceeds the 10°C an infrared scan needs.

A 1950s brick bungalow on a snowy suburban street at dusk, lamplight in the front window
The same bungalow as an infrared camera sees it: heat glowing around the door, window frames, eaves and the rim joist above the foundation
Illustration: the same house in visible light and in infrared. A winter scan shows where heat escapes: door and window edges, the eaves, and the rim joist above the foundation.

What the camera finds in Saint John houses

Of Saint John's 19,705 houses (single-detached, semi-detached, row houses and duplexes), 34% were built before 1961 and 78% before 1991, according to the 2021 Census. Older houses are where the camera earns its keep: empty or settled wall cavities, gaps at the top of walls, and cold corners where framing bridges the insulation. Run it with the blower door test depressurizing the house and every leak shows up as a cold streak.

What it costs

Most EnerGuide advisors include an infrared scan with the evaluation, but it isn't required, so confirm when you book. Through the Total Home Energy Savings Program, a Certified Energy Advisor charges $99 + HST, covering both the initial and final evaluations.

NRCan-licensed service organizations serving Saint John

Most EnerGuide advisors bring an infrared camera, but it isn't a required part of the evaluation, so confirm when you book. The scan is most useful with the blower door running.

Source: NRCan list of licensed service organizations, checked September 28, 2026. Call to confirm your street is covered and ask about wait times.

Programs and local help in Saint John

Provincial · needs an evaluation New Brunswick Total Home Energy Savings Program Evaluation-first: register, get the Home Energy Evaluation, then collect incentives on the recommended upgrades — insulation, heating, doors, windows Open

Thermal imaging inspection in Saint John: common questions

When is the best time for a thermal imaging inspection in Saint John?

Late fall through early spring, when it is at least 10°C colder outside than inside. Cold, overcast days with no direct sun on the walls give the clearest images.

Can a thermal camera see through walls?

No. It reads surface temperatures. Missing insulation or an air leak shows up because it changes the temperature of the wall or ceiling surface.

Who does thermal imaging in Saint John?

Most of the 4 NRCan-licensed organizations serving Saint John bring an infrared camera to an EnerGuide evaluation; confirm when you book.

Thermal imaging inspection near Saint John

Thermal imaging inspection in Fredericton81 kmThermal imaging inspection in Moncton123 kmThermal imaging inspection in Halifax204 kmThermal imaging inspection in Charlottetown247 kmThermal imaging inspection in Lévis431 km All 70 cities →

Sources

Checked September 28, 2026. Census figures are for the municipality (New Brunswick); climate data is NRCan's HOT2000 station Saint John (11 km away).

Get matched with a registered advisor in Saint John

Tell us your postal code and what you’re planning. We’ll connect you with one licensed service organization serving your area. No spam, no shared lead lists.

Email us what you’re planning, your postal code and the type of building (a house, a duplex or triplex, or a larger multi-unit building) — we’ll reply with registered service organizations for your area and which rebates apply.

Email dave@clickshift.ca

This inbox is answered by a person. Participating advisors pay us a referral fee — you pay nothing, and it never affects the directory.